我不知道我做错了什么。我完全按照说明安装了 LatexTools，但每次我尝试编译时都会出现一条消息：“找不到传统构建器”。我将构建器更改为“简单”，但消息仍然相同：“找不到简单构建器”。我读过的所有解决方案都不起作用。我使用 Ubuntu。我希望你能帮助我。
这是我的 LatexTools.sublime 设置：
// LaTeXTools Preferences DEFAULT SETTINGS
//
// DO NOT EDIT THIS FILE!!! Open the Command Palette and run the "Reconfigure and migrate settings"
// command. Alternatively, select the "Reconfigure LaTeXTools and migrate settings" item from the
// Preferences, Package Settings, LaTeXTools menu, or open the ST console and type
// sublime.run_command("latextools_migrate")
// This will migrate your old settings and create a file "LaTeXTools.sublime-settings" in your
// User directory. You can also manually copy this file to the User directory.
//
// Once the file is in the User directory, you can edit it at will.
{
// ------------------------------------------------------------------
// General settings
// ------------------------------------------------------------------
// Cite/ref autocompletion by default is triggered after e.g. \ref{. If you don't like this,
// set to false. You can also use toggles: C-l,t,a,c and C-l,t,a,r.
"cite_auto_trigger": true,
"ref_auto_trigger": true,
// Sometimes a \ref is preceded by an open parenthesis.
// By default, we do not close the parenthesis after completion
// But, if you want us to, set this to true.
"ref_add_parenthesis": false,
// Fill-helper autocompletion triggered for a wide range of references to external
// files. You can also use toggle: C-l,t,a,f
"fill_auto_trigger": true,
// Keep focus on Sublime Text after building (true) or switch to PDF viewer (false)
// If you are on Windows or Linux and using ST2, you may need to set the
// "sublime_executable" setting for this to work in your platform settings.
"keep_focus": true,
// Sync PDF to current editor position after building (true) or not
"forward_sync": true,
// When to trigger cwl-command completion (requires the LaTeX-cwl package)
// possible values are:
// "always" (always show command completions)
// "prefixed" (default, show command completions if the current word is prefixed with '\')
// "never" (never show command completions)
"command_completion": "prefixed",
// level to hide the build panel after the build is finished
// Possible values are:
// "always" (hide the panel even if the build failed),
// "no_errors" (only hide the panel if the build was successful even with warnings),
// "no_warnings" (only hide the panel if no warnings occur) and
// "never" (default, never hide the build panel)
"hide_build_panel": "never",
// valid texfile extensions
"tex_file_exts": [".tex"],
// controls whether or not syntax is automatically set to LaTeX for
// files that match one of the configured `tex_file_exts`
"latextools_set_syntax": true,
// ------------------------------------------------------------------
// Temporary file settings
// ------------------------------------------------------------------
// Ends of the names of temporary files to be deleted
"temp_files_exts": [
".blg",".bbl",".aux",".log",".brf",".nlo",".out",".dvi",".ps",
".lof",".toc",".fls",".fdb_latexmk",".pdfsync",".synctex.gz",
".ind",".ilg",".idx"
],
// Folders that are not traversed when deleting temp files
"temp_files_ignored_folders": [
".git", ".svn", ".hg"
],
// ------------------------------------------------------------------
// Platform settings: adapt as needed for your machine
// ------------------------------------------------------------------
"osx": {
// Path used when invoking tex & friends; MUST include $PATH
"texpath" : "$PATH:/Library/TeX/texbin:/usr/texbin:/usr/local/bin:/opt/local/bin"
// Path to PDF viewer, if needed
// TODO think about it. Also, maybe configure it here!
},
"windows": {
// Path used when invoking tex & friends; "" is fine for MiKTeX
// For TeXlive 2011 (or other years) use
// "texpath" : "C:\\texlive\\2011\\bin\\win32;$PATH",
"texpath" : "",
// TeX distro: "miktex" or "texlive"
"distro" : "miktex",
// Command to invoke Sumatra. If blank, "SumatraPDF.exe" is used (it has to be on your PATH)
"sumatra": "",
// Command to invoke Sublime Text. Used if the keep_focus toggle is true.
// If blank, "subl.exe" or "sublime_text.exe" will be used.
"sublime_executable": "",
// how long (in seconds) to wait after the jump_to_pdf command completes
// before switching focus back to Sublime Text. This may need to be
// adjusted depending on your machine and configuration.
"keep_focus_delay": 0.5
},
"linux" : {
// Path used when invoking tex & friends; MUST include $PATH
"texpath" : "$PATH:/usr/bin/latexmk",
// Command to invoke Python 2. Useful if you have both Python 2 and Python 3 on your system,
// and "python" by default is linked to Python 3. If blank, "python" is used
// Note: ST3 uses Python 3 internally, but the evince scripts need Python 2
"python2": "",
// The name of the ST2 or ST3 executable. On Ubuntu, both subl and sublime-text are
// available for ST2; adjust as needed for other platforms, and for ST3
"sublime": "sublime-text",
// How long to wait after evince has launched before sending a sync message
// in seconds, floating point; choose 2.0 or 3.0 on a slower machine, 0.5 on a fast one
// Note: only tweak this if sync after launching the PDF viewer does not seem to work,
// or if the PDF viewer opens instantly and you don't want to wait.
// Default: 1.5 (works on my MBP4,1...)
"sync_wait": 1.5,
// Command to invoke Sublime Text. Used if the keep_focus toggle is true.
// If blank, "subl" or "sublime_text" will be used.
"sublime_executable": "",
// how long (in ms) to wait after the jump_to_pdf command completes
// before switching focus back to Sublime Text. This may need to be
// adjusted depending on your machine and configuration.
"keep_focus_delay": 0.5
},
// ------------------------------------------------------------------
// Build engine settings
// ------------------------------------------------------------------
// OPTION: "builder"
// Specifies a build engine
// Possible values:
//
// "default" or "" the default built-in build engine; currently
// this is the same as "traditional"
//
// "simple" invokes pdflatex 1x or 2x as needed, then
// bibtex and pdflatex again if needed;
// intended mainly as a simple example for
// people writing their own build engines.
//
// "traditional" replicates the 'old' system based on
// latexmk (TeXLive) / texify (MiKTeX)
//
// "script" external script: just invokes the script
// specified in "builder_settings"
//
// custom name you can also use third-party build engines;
// if so, set the "builder_path" option below
//
// NOTE: custom builders CANNOT have the same name as an existing
// built-in build engine (including "default")
"builder": "traditional",
// OPTION: "builder_path"
// If non-empty, specifies a path to a custom builder, relative to the
// Sublime Text Packages directory.
// For instance, "User/builders" (on Windows: "User\builders") is a good
// choice if you roll your own.
// (Note: if you choose "User", you may get a Python import error in the
// console, but things will still work).
// Leave empty ("") for a built-in builder.
"builder_path": "",
// OPTION: "builder_settings"
// Specify builder-dependent settings and preferences
// Possible values: see README or documentation provided with
// third-party build engine.
// Builder setting can be general or OS-dependent
"builder_settings" : {
// General settings:
// See README or third-party documentation
// (built-ins): true shows the log of each command in the output panel
"display_log" : false,
// Platform-specific settings:
"osx" : {
// See README or third-party documentation
},
"windows" : {
// See README or third-party documentation
},
"linux" : {
// See README or third-party documentation
}
},
// ------------------------------------------------------------------
// Opening files included into the tex source code
// ------------------------------------------------------------------
// image types you use in latex
// these types will be used for autocompletion and
// opening of included images, when no extension is written
"image_types": ["png", "pdf", "jpg", "jpeg", "eps"],
// the commands to open image files. The extensions will be matched from top to bottom.
// If no extension is given, all extensions will be matched.
// If there is no match the image will be opened with Sublime Text.
// the extension:
// can either be a string for one extension
// or an array of string to match more than one extensions.
// the command:
// can be the name to start the programm. The image file will be passed
// as the argument.
// can be a string as a command with args:
// e.g. "open -a PixelMator", in this case the file will be appended
// if the position is relevant use "$file" in the string
// e.g. "open -a PixelMator $file"
// this will be substituted by the path to the file
"open_image_command": {
"osx" : [
{
// open pdf and eps documents with skim
"extension": ["pdf", "eps"],
"command": "open -a Skim.app"
}
// uncomment these lines to open all other images with the default programm
// ,
// {
// "command": "open"
// }
],
// You might want to use "start" for the default programm used by Windows.
"windows": [
{
// open pdf and eps documents with sumatra (it has to be on your PATH)
"extension": ["pdf", "eps"],
"command": "SumatraPDF"
}
// uncomment these lines to open all other images with the default programm
// ,
// {
// "command": "start"
// }
],
"linux": [
{
// open pdf documents with evince
"extension": "pdf",
"command": "evince"
}
// uncomment these lines to open all other images with the default programm
// ,
// {
// "command": "xdg-open"
// }
]
},
// ------------------------------------------------------------------
// Formatting of bibliographic references in quick panel
// ------------------------------------------------------------------
/* This preference sets the format of the quick panel to select citations using wildcards.
The setting is a list with one or two string using wildcards for author, title, keyword etc.
Default setting: the traditional display, `["{title} ({keyword})","{author}"]`
Format:
Can quantum-mechanical description of physical reality be considered complete? This is an non-existing subtitle to illustrate (einstein1935quantum)
Albert Einstein and B Podolsky and N Rosen
Richer alternative: ["{author_short} {year} - {title_short} ({keyword})","{title}"]
Format:
Einstein et al. 1935 - Can quantum-mechanical description of physical reality be considered complete (einstein1935quantum)
Can quantum-mechanical description of physical reality be considered complete? This is an non-existing subtitle to illustrate
Another alternative: ["({keyword}) {author_short} - {year}","{title} - {journal}"]
Format:
(einstein1935quantum) Einstein et al. - 1935
Can quantum-mechanical description of physical reality be considered complete? - Physical Review
No-title alternative: ["{author_short} {year} ({keyword})"]
Format:
Einstein et al. 1935 (einstein1935quantum)
Valid wildcards: keyword, title, author, year, author_short, title_short, journal
*/
// Uncomment or modify at will
"cite_panel_format": ["{author_short} {year} - {title_short} ({keyword})","{title}"],
//"cite_panel_format": ["({keyword}) {author_short} - {year}","{title} - {journal}"],
//"cite_panel_format": ["{author_short} {year} ({keyword})"],
// Similarly, the formatting for the autocomplete panel:
"cite_autocomplete_format": "{keyword}: {title}"
}
谢谢。
答案1
因此，仅记录评论中的内容：
问题是 LaTeXTools 安装在了一个名为LaTeX工具. LaTeXTools 假定并硬编码其所在的文件夹名为LaTeX工具。