![传输文本](https://linux22.com/image/445135/%E4%BC%A0%E8%BE%93%E6%96%87%E6%9C%AC.png)
我需要在图片后转移第 5.3 节,但 \pagebreak 和 \vspace 似乎不起作用
enter code here begin{figure} [h!]
\centering
\includegraphics[scale=0.55]{Immagini/opt gen}
\caption{Data comparison technique.}
\end{figure}
\begin{figure} [h!]
\centering
\includegraphics[scale=0.35]{Immagini/opt variables}
\caption{Data comparison technique.}
\end{figure}
\begin{figure} [h!]
\centering
\includegraphics[scale=0.70]{Immagini/opt termination}
\caption{Data comparison technique.}
\end{figure}
As for the termination parameter, this can be express as: the ratio between of the sum of
the squared difference between the simulation values and the experimental ones at the
end of the data matching and the its initial value must be less than or equal to a
fixed value (i.e. 0.05)
\begin{equation}
\frac{\sum_{i=1}^{n}((y_{i}-\bar{y})^{2})_{fin}}{\sum_{i=1}^{n}((y_{i}-
\bar{y})^{2})_{in}}=\epsilon
\end{equation}
\begin{figure} [h!]
\centering
\includegraphics[scale=0.55]{Immagini/opt obj}
\caption{Data comparison technique.}
\end{figure}
The final objective is to achieve a data matching according to the termination
parameters and the boundary conditions set.
\vspace{100mm}
\section{Conclusion}