☰

Udev 规则未设置组

tag-icon • tag-icon udev
Udev 规则未设置组

我正在尝试编写 udev 规则来更改 MSP-FET430UIF USB 编程器上的组。这是我到目前为止所拥有的（文件名/etc/udev/rules.d/40-ti-fet430.rules）：

SUBSYSTEM=="usb", ATTR{idVendor}=="0451", ATTR{idProduct}=="f430", MODE="0660", GROUP="plugdev", RUN+="/tmp/test.sh"

运行命令（仅将日期重定向到 /tmp/test ）正在运行。但是，/dev/ttyUSB0 设备的组和权限没有更改：

$ ls -l /dev/ttyUSB0
crw------- 1 root root 188, 0 May 18 13:05 /dev/ttyUSB0

这是以下的输出udevadm test /device/blabla：

$ udevadm test `udevadm info -q path -n /dev/ttyUSB0 `
calling: test
version 216
This program is for debugging only, it does not run any program
specified by a RUN key. It may show incorrect results, because
some values may be different, or not available at a simulation run.

load module index
timestamp of '/etc/systemd/network' changed
timestamp of '/lib/systemd/network' changed
Parsed configuration file /lib64/systemd/network/99-default.link
Created link configuration context.
timestamp of '/etc/udev/rules.d' changed
Reading rules file: /lib64/udev/rules.d/40-gentoo.rules
Reading rules file: /etc/udev/rules.d/40-ti-fet430.rules
Reading rules file: /lib64/udev/rules.d/42-usb-hid-pm.rules
Reading rules file: /lib64/udev/rules.d/50-firmware.rules
Reading rules file: /lib64/udev/rules.d/50-udev-default.rules
Reading rules file: /etc/udev/rules.d/52-digilent-usb.rules
Reading rules file: /lib64/udev/rules.d/56-hpmud.rules
Reading rules file: /lib64/udev/rules.d/60-cdrom_id.rules
Reading rules file: /lib64/udev/rules.d/60-drm.rules
Reading rules file: /lib64/udev/rules.d/60-keyboard.rules
Reading rules file: /lib64/udev/rules.d/60-persistent-alsa.rules
Reading rules file: /lib64/udev/rules.d/60-persistent-input.rules
Reading rules file: /lib64/udev/rules.d/60-persistent-serial.rules
Reading rules file: /lib64/udev/rules.d/60-persistent-storage-tape.rules
Reading rules file: /lib64/udev/rules.d/60-persistent-storage.rules
Reading rules file: /lib64/udev/rules.d/60-persistent-v4l.rules
Reading rules file: /lib64/udev/rules.d/61-accelerometer.rules
Reading rules file: /run/udev/rules.d/61-dev-root-link.rules
Reading rules file: /lib64/udev/rules.d/64-btrfs.rules
Reading rules file: /lib64/udev/rules.d/70-udev-acl.rules
Reading rules file: /lib64/udev/rules.d/75-net-description.rules
Reading rules file: /lib64/udev/rules.d/75-probe_mtd.rules
Reading rules file: /lib64/udev/rules.d/75-tty-description.rules
Reading rules file: /lib64/udev/rules.d/78-sound-card.rules
Reading rules file: /lib64/udev/rules.d/80-drivers.rules
Reading rules file: /lib64/udev/rules.d/80-net-setup-link.rules
Reading rules file: /lib64/udev/rules.d/80-udisks2.rules
Reading rules file: /lib64/udev/rules.d/85-regulatory.rules
Reading rules file: /lib64/udev/rules.d/90-alsa-restore.rules
Reading rules file: /lib64/udev/rules.d/90-network.rules
Reading rules file: /lib64/udev/rules.d/95-udev-late.rules
Reading rules file: /lib64/udev/rules.d/95-upower-battery-recall-dell.rules
Reading rules file: /lib64/udev/rules.d/95-upower-battery-recall-fujitsu.rules
Reading rules file: /lib64/udev/rules.d/95-upower-battery-recall-gateway.rules
Reading rules file: /lib64/udev/rules.d/95-upower-battery-recall-ibm.rules
Reading rules file: /lib64/udev/rules.d/95-upower-battery-recall-lenovo.rules
Reading rules file: /lib64/udev/rules.d/95-upower-battery-recall-toshiba.rules
Reading rules file: /lib64/udev/rules.d/95-upower-csr.rules
Reading rules file: /lib64/udev/rules.d/95-upower-hid.rules
Reading rules file: /lib64/udev/rules.d/95-upower-wup.rules
Reading rules file: /lib64/udev/rules.d/97-hid2hci.rules
rules contain 49152 bytes tokens (4096 * 12 bytes), 12512 bytes strings
2501 strings (28205 bytes), 1749 de-duplicated (16446 bytes), 753 trie nodes used
IMPORT builtin 'path_id' /lib64/udev/rules.d/60-persistent-serial.rules:9
LINK 'serial/by-path/pci-0000:00:13.0-usb-0:2:2.0-port0' /lib64/udev/rules.d/60-persistent-serial.rules:11
IMPORT builtin 'usb_id' /lib64/udev/rules.d/60-persistent-serial.rules:13
/sys/devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:2.0: if_class 255 protocol 0
LINK 'serial/by-id/usb-Texas_Instruments_MSP-FET430UIF_JTAG_Tool_TUSB3410172ECD5EF754FF89-if00-port0' /lib64/udev/rules.d/60-persistent-serial.rules:18
IMPORT builtin skip 'usb_id' /lib64/udev/rules.d/75-tty-description.rules:6
IMPORT builtin 'hwdb' /lib64/udev/rules.d/75-tty-description.rules:6
handling device node '/dev/ttyUSB0', devnum=c188:0, mode=0600, uid=0, gid=0
preserve permissions /dev/ttyUSB0, 020600, uid=0, gid=0
preserve already existing symlink '/dev/char/188:0' to '../ttyUSB0'
found 'c188:0' claiming '/run/udev/links//serial/by-id/usb-Texas_Instruments_MSP-FET430UIF_JTAG_Tool_TUSB3410172ECD5EF754FF89-if00-port0'
creating link '/dev/serial/by-id/usb-Texas_Instruments_MSP-FET430UIF_JTAG_Tool_TUSB3410172ECD5EF754FF89-if00-port0' to '/dev/ttyUSB0'
preserve already existing symlink '/dev/serial/by-id/usb-Texas_Instruments_MSP-FET430UIF_JTAG_Tool_TUSB3410172ECD5EF754FF89-if00-port0' to '../../ttyUSB0'
found 'c188:0' claiming '/run/udev/links//serial/by-path/pci-0000:00:13.0-usb-0:2:2.0-port0'
creating link '/dev/serial/by-path/pci-0000:00:13.0-usb-0:2:2.0-port0' to '/dev/ttyUSB0'
preserve already existing symlink '/dev/serial/by-path/pci-0000:00:13.0-usb-0:2:2.0-port0' to '../../ttyUSB0'
unable to create temporary db file '/run/udev/data/c188:0.tmp': Permission denied
.ID_PORT=0
ACTION=add
DEVLINKS=/dev/serial/by-id/usb-Texas_Instruments_MSP-FET430UIF_JTAG_Tool_TUSB3410172ECD5EF754FF89-if00-port0 /dev/serial/by-path/pci-0000:00:13.0-usb-0:2:2.0-port0
DEVNAME=/dev/ttyUSB0
DEVPATH=/devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:2.0/ttyUSB0/tty/ttyUSB0
ID_BUS=usb
ID_MODEL=MSP-FET430UIF_JTAG_Tool
ID_MODEL_ENC=MSP-FET430UIF JTAG Tool
ID_MODEL_FROM_DATABASE=MSP-FET430UIF JTAG Tool
ID_MODEL_ID=f430
ID_PATH=pci-0000:00:13.0-usb-0:2:2.0
ID_PATH_TAG=pci-0000_00_13_0-usb-0_2_2_0
ID_REVISION=0101
ID_SERIAL=Texas_Instruments_MSP-FET430UIF_JTAG_Tool_TUSB3410172ECD5EF754FF89
ID_SERIAL_SHORT=TUSB3410172ECD5EF754FF89
ID_TYPE=generic
ID_USB_CLASS_FROM_DATABASE=Vendor Specific Class
ID_USB_DRIVER=ti_usb_3410_5052
ID_USB_INTERFACES=:ff0000:
ID_USB_INTERFACE_NUM=00
ID_VENDOR=Texas_Instruments
ID_VENDOR_ENC=Texas Instruments
ID_VENDOR_FROM_DATABASE=Texas Instruments, Inc.
ID_VENDOR_ID=0451
MAJOR=188
MINOR=0
SUBSYSTEM=tty
USEC_INITIALIZED=33057949
unload module index
Unloaded link configuration context.

（我必须承认我不确定我应该在udevadm test输出中看到什么）。

总而言之，为什么小组没有改变？

PS 有一条规则将组设置为 uucp，但为了简单起见，我注释掉了该规则。它在/lib64/udev/rules.d/50-udev-default.rules文件中，所以如果我理解正确，我的规则无论如何都会优先。

输出udevadm info -a /dev/ttyUSB0：

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

  looking at device '/devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:2.0/ttyUSB0/tty/ttyUSB0':
    KERNEL=="ttyUSB0"
    SUBSYSTEM=="tty"
    DRIVER==""

  looking at parent device '/devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:2.0/ttyUSB0':
    KERNELS=="ttyUSB0"
    SUBSYSTEMS=="usb-serial"
    DRIVERS=="ti_usb_3410_5052_1"
    ATTRS{port_number}=="0"

  looking at parent device '/devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:2.0':
    KERNELS=="2-2:2.0"
    SUBSYSTEMS=="usb"
    DRIVERS=="ti_usb_3410_5052"
    ATTRS{bInterfaceClass}=="ff"
    ATTRS{bInterfaceSubClass}=="00"
    ATTRS{bInterfaceProtocol}=="00"
    ATTRS{bNumEndpoints}=="03"
    ATTRS{supports_autosuspend}=="1"
    ATTRS{bAlternateSetting}==" 0"
    ATTRS{bInterfaceNumber}=="00"

  looking at parent device '/devices/pci0000:00/0000:00:13.0/usb2/2-2':
    KERNELS=="2-2"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{devpath}=="2"
    ATTRS{idVendor}=="0451"
    ATTRS{speed}=="12"
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="2"
    ATTRS{bMaxPacketSize0}=="8"
    ATTRS{busnum}=="2"
    ATTRS{devnum}=="3"
    ATTRS{configuration}==""
    ATTRS{bMaxPower}=="100mA"
    ATTRS{authorized}=="1"
    ATTRS{bmAttributes}=="a0"
    ATTRS{bNumConfigurations}=="2"
    ATTRS{maxchild}=="0"
    ATTRS{bcdDevice}=="0101"
    ATTRS{avoid_reset_quirk}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{serial}=="TUSB3410172ECD5EF754FF89"
    ATTRS{version}==" 1.10"
    ATTRS{urbnum}=="13"
    ATTRS{ltm_capable}=="no"
    ATTRS{manufacturer}=="Texas Instruments"
    ATTRS{removable}=="unknown"
    ATTRS{idProduct}=="f430"
    ATTRS{bDeviceClass}=="ff"
    ATTRS{product}=="MSP-FET430UIF JTAG Tool"

  looking at parent device '/devices/pci0000:00/0000:00:13.0/usb2':
    KERNELS=="usb2"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{devpath}=="0"
    ATTRS{idVendor}=="1d6b"
    ATTRS{speed}=="12"
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{authorized_default}=="1"
    ATTRS{busnum}=="2"
    ATTRS{devnum}=="1"
    ATTRS{configuration}==""
    ATTRS{bMaxPower}=="0mA"
    ATTRS{authorized}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{maxchild}=="2"
    ATTRS{bcdDevice}=="0318"
    ATTRS{avoid_reset_quirk}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{serial}=="0000:00:13.0"
    ATTRS{version}==" 1.10"
    ATTRS{urbnum}=="49"
    ATTRS{ltm_capable}=="no"
    ATTRS{manufacturer}=="Linux 3.18.12-gentoo ohci_hcd"
    ATTRS{removable}=="unknown"
    ATTRS{idProduct}=="0001"
    ATTRS{bDeviceClass}=="09"
    ATTRS{product}=="OHCI PCI host controller"

  looking at parent device '/devices/pci0000:00/0000:00:13.0':
    KERNELS=="0000:00:13.0"
    SUBSYSTEMS=="pci"
    DRIVERS=="ohci-pci"
    ATTRS{irq}=="16"
    ATTRS{subsystem_vendor}=="0x1028"
    ATTRS{broken_parity_status}=="0"
    ATTRS{class}=="0x0c0310"
    ATTRS{driver_override}=="(null)"
    ATTRS{consistent_dma_mask_bits}=="32"
    ATTRS{dma_mask_bits}=="32"
    ATTRS{local_cpus}=="ffffffff"
    ATTRS{device}=="0x4387"
    ATTRS{enable}=="1"
    ATTRS{msi_bus}=="1"
    ATTRS{local_cpulist}=="0-31"
    ATTRS{vendor}=="0x1002"
    ATTRS{subsystem_device}=="0x01fc"

  looking at parent device '/devices/pci0000:00':
    KERNELS=="pci0000:00"
    SUBSYSTEMS==""
    DRIVERS==""

答案1

  • 您瞄准了错误的节点。您当前的规则：

    SUBSYSTEM=="usb", ATTR{idVendor}=="0451", ATTR{idProduct}=="f430"

    匹配此节点：

    /devices/pci0000:00/0000:00:13.0/usb2/2-2

  • 您应该在哪里定位与您的设备匹配的叶节点/dev/ttyUSB0，即：

    /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:2.0/ttyUSB0/tty/ttyUSB0

    或者可能：

    /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:2.0/ttyUSB0

    试试这个：

    KERNEL=="ttyUSB[0-9]*", SUBSYSTEMS=="usb", ATTRS{idVendor}=="0451", ATTRS{idProduct}=="f430", MODE="0660", GROUP="plugdev", RUN+="/tmp/test.sh"

    SUBSYSTEMS注意,ATTRS和SUBSYSTEM,之间的区别ATTR。查看man udev

  • 好吧，你的新规则：

    SUBSYSTEMS=="usb", ATTRS{idVendor}=="0451", ATTRS{idProduct}=="f430", MODE="0660", GROUP="plugdev", RUN+="/tmp/test.sh"

    将为所有这些节点触发：

    /devices/pci0000:00/0000:00:13.0/usb2/2-2
/devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:2.0
/devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:2.0/ttyUSB0
/devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:2.0/ttyUSB0/tty/ttyUSB0

相关内容