几年前，我将一个硬盘装在“inateck 2.5 英寸 SATA 硬盘外置外壳”中。当时我能够在 Windows 上访问此驱动器中的文件。现在，使用 Ubuntu，当通过 USB 插入并打开驱动器时，我无法使用“磁盘”应用程序找到该驱动器。它在 Nautilus 文件浏览器中也不可见。
这是为什么？我知道计算机看到了一些东西。运行该命令sudo dmesg | tail -16返回以下内容：
[410544.610774] usb 3-5: new high-speed USB device number 61 using xhci_hcd
[410544.759198] usb 3-5: New USB device found, idVendor=2537, idProduct=1066, bcdDevice= 1.00
[410544.759208] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[410544.759212] usb 3-5: Product: NS1066
[410544.759215] usb 3-5: Manufacturer: Norelsys
[410544.759217] usb 3-5: SerialNumber: 0123456789ABCDE
[410544.760661] usb-storage 3-5:1.0: USB Mass Storage device detected
[410544.761364] scsi host1: usb-storage 3-5:1.0
[410547.897361] scsi 1:0:0:0: Direct-Access NORELSYS 106X 0001 PQ: 0 ANSI: 6
[410547.897965] sd 1:0:0:0: Attached scsi generic sg0 type 0
[410547.898377] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[410547.899225] sd 1:0:0:0: [sda] Write Protect is off
[410547.899234] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[410547.899677] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[410548.033030] sda: sda1 sda2
[410548.083654] sd 1:0:0:0: [sda] Attached SCSI disk
sudo lsblk返回以下内容（也不显示新连接的驱动器）：
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
loop0 7:0 0 43.6M 1 loop /snap/snapd/15177
loop1 7:1 0 55.5M 1 loop /snap/core18/2344
loop2 7:2 0 215.4M 1 loop /snap/blender/2106
loop3 7:3 0 44.7M 1 loop /snap/snapd/15534
sda 8:0 0 931.5G 0 disk
├─sda1 8:1 0 200M 0 part
└─sda2 8:2 0 931.2G 0 part
nvme0n1 259:0 0 931.5G 0 disk
├─nvme0n1p1 259:1 0 512M 0 part /boot/efi
├─nvme0n1p2 259:2 0 4G 0 part /recovery
├─nvme0n1p3 259:3 0 923G 0 part /
└─nvme0n1p4 259:4 0 4G 0 part
└─cryptswap 253:0 0 4G 0 crypt [SWAP]
为什么我无法访问驱动器上的文件？为什么我甚至看不到驱动器？
谢谢，谨致问候。