我有2张显卡，lspci的输出：
01:00.0 VGA compatible controller: ATI Technologies Inc RV770 [Radeon HD 4850]
02:00.0 VGA compatible controller: ATI Technologies Inc RV710 [Radeon HD 4350]
我有一个显示器连接到 4850，另外两个连接到 4350。但是，当我进入“系统”>“首选项”>“显示器”时，唯一显示的显示器是连接到 4850 的显示器。
我需要启用什么才能使用另一张卡？我该如何让它工作。
谢谢。
按要求：
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-25-server i686 Ubuntu
Current Operating System: Linux jeff-desktop 2.6.32-22-generic-pae #33-Ubuntu SMP Wed Apr 28 14:57:29 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic-pae root=UUID=852e1013-4ed6-40fd-a462-c29087888383 ro quiet splash
Build Date: 23 April 2010 05:11:50PM
xorg-server 2:1.7.6-2ubuntu7 (Bryce Harrington <[email protected]>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue May 11 08:24:52 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/usr/lib/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Default Device"
(==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x81f0e80
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 1002:9442:174b:e104 ATI Technologies Inc RV770 [Radeon HD 4850] rev 0, Mem @ 0xc0000000/268435456, 0xfe7e0000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
(--) PCI: (0:2:0:0) 1002:954f:1462:1618 ATI Technologies Inc RV710 [Radeon HD 4350] rev 0, Mem @ 0xd0000000/268435456, 0xfe8e0000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/extra-modules/modules/extensions/libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.5.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/extra-modules/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.7.1, module version = 8.72.11
Module class: X.Org Video Driver
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.7.1, module version = 8.72.11
(II) ATI Proprietary Linux Driver Version Identifier:8.72.11
(II) ATI Proprietary Linux Driver Release Identifier: 8.723.1
(II) ATI Proprietary Linux Driver Build Date: Apr 8 2010 21:40:29
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:0) found
(--) Chipset Supported AMD Graphics Processor (0x9442) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
(**) ChipID override: 0x954F
(**) Chipset Supported AMD Graphics Processor (0x954F) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) fglrx(0): pEnt->device->identifier=0x9428aa0
(II) pEnt->device->identifier=(nil)
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/extra-modules/modules/linux/libfglrxdrm.so
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 10, (OK)
ukiOpenByBusid: ukiOpenMinor returns 10
ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
ukiOpenDevice: node name is /dev/ati/card1
ukiOpenDevice: open result is 10, (OK)
ukiOpenByBusid: ukiOpenMinor returns 10
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiOpenByBusid: Searching for BusID PCI:2:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 11, (OK)
ukiOpenByBusid: ukiOpenMinor returns 11
ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
(--) fglrx(0): Chipset: "ATI Radeon HD 4800 Series" (Chipset = 0x9442)
(--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe104)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
(--) fglrx(0): MMIO registers at 0xfe7e0000
(--) fglrx(0): I/O port at 0x0000a000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.1.0
ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 11.13
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: RV770
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR3
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(--) fglrx(0): Chipset: "ATI Radeon HD 4300/4500 Series" (Chipset = 0x954f)
(--) fglrx(0): (PciSubVendor = 0x1462, PciSubDevice = 0x1618)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfe8e0000
(--) fglrx(0): I/O port at 0x0000b000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Invalid ATI BIOS from int10, the adapter is not VGA-enabled
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 524288 kByte, Type: DDR2
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
(II) fglrx(0): Interrupt handler installed at IRQ 31.
(II) fglrx(0): Using adapter: 2:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Finished Initialize PPLIB!
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display0: DFP on external TMDS [tmds2]
(II) fglrx(0): Display0 EDID data ---------------------------
(II) fglrx(0): Manufacturer: DEL Model: a038 Serial#: 810829397
(II) fglrx(0): Year: 2008 Week: 51
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 53 vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): Default color space is primary color space
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): #2: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 148.5 MHz Image Size: 531 x 298 mm
(II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
(II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
(II) fglrx(0): Serial No: Y183D8CF0TFU
(II) fglrx(0): Monitor name: DELL S2409W
(II) fglrx(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 170 MHz
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff0010ac38a055465430
(II) fglrx(0): 3312010380351e78eeee91a3544c9926
(II) fglrx(0): 0f5054a54b00714f8180d1c001010101
(II) fglrx(0): 010101010101023a801871382d40582c
(II) fglrx(0): 4500132a2100001e000000ff00593138
(II) fglrx(0): 3344384346305446550a000000fc0044
(II) fglrx(0): 454c4c205332343039570a20000000fd
(II) fglrx(0): 00324c1e5311000a2020202020200059
(II) fglrx(0): End of Display0 EDID data --------------------
(II) fglrx(0): Output DFP2 has no monitor section
(II) fglrx(0): Output DFP_EXTTMDS has no monitor section
(II) fglrx(0): Output CRT1 has no monitor section
(II) fglrx(0): Output CRT2 has no monitor section
(II) fglrx(0): Output DFP2 disconnected
(II) fglrx(0): Output DFP_EXTTMDS connected
(II) fglrx(0): Output CRT1 disconnected
(II) fglrx(0): Output CRT2 disconnected
(II) fglrx(0): Using exact sizes for initial modes
(II) fglrx(0): Output DFP_EXTTMDS using initial mode 1920x1080
(II) fglrx(0): DPI set to (96, 96)
(II) fglrx(0): Adapter ATI Radeon HD 4800 Series has 2 configurable heads and 1 displays connected.
(==) fglrx(0): QBS disabled
(==) fglrx(0): PseudoColor visuals disabled
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing swlDriScreenInit
(II) fglrx(0): swlDriScreenInit for fglrx driver
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 17, (OK)
ukiOpenByBusid: ukiOpenMinor returns 17
ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
ukiOpenDevice: node name is /dev/ati/card1
ukiOpenDevice: open result is 17, (OK)
ukiOpenByBusid: ukiOpenMinor returns 17
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(II) fglrx(0): [uki] DRM interface version 1.0
(II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [uki] mapped SAREA 0x2000 to 0xb6996000
(II) fglrx(0): [uki] framebuffer handle = 0x3000
(II) fglrx(0): [uki] added 1 reserved context for kernel
(II) fglrx(0): swlDriScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.72.11
(II) fglrx(0): Date: Apr 8 2010
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.32-22-generic-pae
(II) fglrx(0): Build-Kernel MODVERSIONS: yes
(II) fglrx(0): Build-Kernel __SMP__: yes
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [uki] register handle = 0x00004000
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01068000
(II) fglrx(0): FBMM initialized for area (0,0)-(1920,2240)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1920,1920) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1920 x 320
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(==) fglrx(0): DPMS enabled
(II) fglrx(0): Initialized in-driver Xinerama extension
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/extra-modules/modules/glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
(II) Loading extension GLESX
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.2.1
ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): GLESX enableFlags = 94
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Driver provided ScreenToScreenBitBlt replacement
Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/extra-modules/modules/amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
(II) Loading extension AMDXVOPL
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): Enable composite support successfully
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
(--) RandR disabled
(II) Found 2 VGA devices: arbiter wrapping enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiOpenByBusid: Searching for BusID PCI:1:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 18, (OK)
ukiOpenByBusid: ukiOpenMinor returns 18
ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
ukiOpenDevice: node name is /dev/ati/card1
ukiOpenDevice: open result is 18, (OK)
ukiOpenByBusid: ukiOpenMinor returns 18
ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
(II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) fglrx(0): Enable the clock gating!
(II) fglrx(0): Setting screen physical size to 507 x 285
(II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Power Button (/dev/input/event0)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event3)
(**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
(**) Logitech USB-PS/2 Optical Mouse: always reports core events
(**) Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event3"
(II) Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
(II) Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
(II) Logitech USB-PS/2 Optical Mouse: Found relative axes
(II) Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
(II) Logitech USB-PS/2 Optical Mouse: Configuring as mouse
(**) Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE)
(II) Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
(II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event4)
(**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
(**) Logitech USB Multimedia Keyboard: always reports core events
(**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event4"
(II) Logitech USB Multimedia Keyboard: Found keys
(II) Logitech USB Multimedia Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event5)
(**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
(**) Logitech USB Multimedia Keyboard: always reports core events
(**) Logitech USB Multimedia Keyboard: Device: "/dev/input/event5"
(II) Logitech USB Multimedia Keyboard: Found keys
(II) Logitech USB Multimedia Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device KEYBOARD (/dev/input/event6)
(**) KEYBOARD: Applying InputClass "evdev keyboard catchall"
(**) KEYBOARD: always reports core events
(**) KEYBOARD: Device: "/dev/input/event6"
(II) KEYBOARD: Found keys
(II) KEYBOARD: Configuring as keyboard
(II) XINPUT: Adding extended input device "KEYBOARD" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device KEYBOARD (/dev/input/event7)
(**) KEYBOARD: Applying InputClass "evdev keyboard catchall"
(**) KEYBOARD: always reports core events
(**) KEYBOARD: Device: "/dev/input/event7"
(II) KEYBOARD: Found 14 mouse buttons
(II) KEYBOARD: Found scroll wheel(s)
(II) KEYBOARD: Found relative axes
(II) KEYBOARD: Found keys
(II) KEYBOARD: Configuring as mouse
(II) KEYBOARD: Configuring as keyboard
(**) KEYBOARD: YAxisMapping: buttons 4 and 5
(**) KEYBOARD: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "KEYBOARD" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us"
(EE) KEYBOARD: failed to initialize for relative axes.
(II) config/udev: Adding input device KEYBOARD (/dev/input/mouse2)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event2)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
答案1
那行不通。你看，Xorg 的权威人士已经决定，取消拥有多块主板的人配置它们的能力，比拥有笔记本电脑的人需要自己学习如何做事要好。
XRandR 1.2 不支持多块主板（GPU 对象支持）。它原定于 1.3 版发布，但现在已移至 2.0 版。真正让我生气的是，没有人通知我。自 Slackware 7 以来，我一直在运行多块主板，现在，只要这些主板有支持 XRandR 的驱动程序，我就不能再运行了。
简而言之，您要么必须恢复到旧版本的 X，要么必须恢复到旧驱动程序。无论哪种方式，X 的家伙们都自顾不暇。
答案2
您可能需要在ATI 催化剂控制中心应用程序。我不确定在 Gnome 下您究竟在哪里可以找到它。在 KDE 中，它位于应用程序 -> 设置中。这就是我在 Kubuntu 10.04 中必须执行的操作，才能识别我的两个显示器。
如果您安装了专有驱动程序，它也应该在那里。它为我更新了 xorg.conf。或者，您需要手动设置。这是我的 xorg.conf，供参考：
Section "ServerLayout"
Identifier "amdcccle Layout"
Screen 0 "amdcccle-Screen[1]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "off"
EndSection
Section "Monitor"
Identifier "0-LVDS"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1600x900"
Option "TargetRefresh" "60"
Option "Position" "1920 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Monitor"
Identifier "0-CRT1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
Option "Position" "0 0"
Option "Rotate" "normal"
Option "Disable" "false"
EndSection
Section "Device"
Identifier "Default Device"
Driver "fglrx"
EndSection
Section "Device"
Identifier "amdcccle-Device[1]-0"
Driver "fglrx"
Option "Monitor-LVDS" "0-LVDS"
Option "Monitor-CRT1" "0-CRT1"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Default Screen"
DefaultDepth 24
EndSection
答案3
首先将xorg.conf其复制到您的主目录进行备份（cp /etc/X11/xorg.conf /home/whatever）
然后从终端发出以下命令
sudo aticonfig --initial=dual-head --adapter=all
这将通过创建一个新xorg.conf文件来启动您的所有卡。
重新启动您的机器。（或者重新启动 X）。
备份完成后，所有显示器都将正常工作。现在启动 ATI 催化剂控制中心，并调整显示器的位置等
答案4
您可能只需要编辑 xorg.conf 文件。在 /etc/X11/xorg.conf 文件中，有一个名为“device”的部分。您需要为系统中的每个视频卡设置 1 个设备部分。
在“设备”部分中，您可以为每个视频卡指定一个唯一的名称，以便 X 知道您正在谈论哪一个，然后是一些其他选项，例如设备在 PCI 总线上的位置。
例如，通过读取 xorg.conf 设备部分，它知道视频卡 1 位于位置“PCI:1:0:0”，而第二张卡（在其自己的设备部分）位于“PCI:2:0:0”。0 和 1 来自问题中 lspci 的输出。在这种情况下这并不重要，因为您的两个设备都低于 16，但请记住 lspci 以十六进制提供其输出，而 xorg.conf 需要以十进制提供其信息。
我知道目前流行的做法是在你的 xorg.conf 中尽可能少地添加，但是当有多个视频卡时不一样，您需要指定它们。多台显示器也一样，如果它们不同，那么您需要指定它们以便正确检测它们。像 ati 和 nvidia 那样的自动配置在工作时很棒，但它并不总是有效。那么您必须指定。